SBA Loan to Buy a Business: Equity Injection, Seller Notes, and the Debt-Service Test

On this page
SBA acquisition math under SOP 50 10 8.1 (effective October 1, 2026):
Total project cost = purchase price + working capital + closing and diligence costs
Required equity = 10% × total project cost (initial acquisition; cannot be waived)
Seller note credit ≤ 50% of required equity (only if on full standby)
7(a) loan = total project cost − equity − any other financing
Pass test = QoE-adjusted cash flow ÷ all required debt service ≥ 1.25
If the deal fails the last line, the loan shrinks and the gap has to come from more equity or a lower price. Everything else in an SBA acquisition is a way of getting that line to pass.
This guide is for a buyer, often an operator from the same industry, looking at a $1M–$5M purchase of an established US service business with a 7(a) loan. The rules come from SBA's SOP 50 10 8.1, Appendix 15, which replaced version 8 effective October 1, 2026.
The rules that shape an acquisition loan
| Rule | Current requirement (initial acquisition) |
|---|---|
| Maximum standard 7(a) loan | $5,000,000 |
| Minimum equity injection | 10% of total project cost; can't be reduced or eliminated |
| Seller debt as equity | Only on full standby: no principal or interest payments for the life of the 7(a) loan |
| Limited equity sources | Standby seller debt, other standby debt, and minority investors under 20%, combined, provide no more than half the required injection |
| Seller debt not on standby | Counts as debt; total debt can't exceed the business valuation and must be covered by DSC |
| Debt service coverage | 1.25:1 minimum (1.15:1 for a qualifying business expansion) |
| Amortization | Up to 10 years for the business; real estate can be blended up to 25 years |
| Business valuation | From an accredited Qualified Source, ordered for the lender; a lender may value it itself at $350,000 or less with no close buyer-seller relationship |
| Quality of earnings | Required when the business purchase price is $3M or more; it must include a cash proof and be prepared for the lender, not the seller |
| Earnouts | Seller earnouts prohibited; buyer rebates based on performance allowed |
| Seller staying on | Not as owner or employee; consultant for no more than 24 months in total |
| Ownership | All direct and indirect owners must be US citizens or nationals with their principal residence in the US |
Two of these catch service-business buyers off guard.
The first is the earnout ban. In service deals, part of the price often depends on client retention. In an SBA deal, that has to be restructured as a buyer rebate. If a key client leaves, the seller pays back, and the SOP requires the rebate to go toward principal on the 7(a) loan.
The second is the $3M QoE trigger. It's measured on the business purchase price before buyer equity or seller debt is applied, so you can't structure around it.
A worked deal: the $3.5M project
Here's a hypothetical buyer acquiring a managed IT services firm.
| Sources and uses | Amount |
|---|---|
| Purchase price (no real estate) | $3,200,000 |
| Working capital | $200,000 |
| Closing, valuation, and QoE costs | $100,000 |
| Total project cost | $3,500,000 |
| Buyer cash (unlimited source) | $175,000 |
| Seller note on full standby (limited source) | $175,000 |
| Required 10% equity | $350,000 |
| 7(a) loan | $3,150,000 |
The QoE costs aren't wasted money on the equity line. The SOP allows funds the buyer spends on financial due diligence reports to count toward the equity injection, as long as they're documented.
At an illustrative 10.5% rate on a 10-year amortization, annual debt service is about $510,100. The standby note has no payments while the SBA loan is outstanding, so it doesn't enter the coverage test.
Case 1: The seller's numbers hold
The QoE confirms cash available for debt service of $720,000, after a market salary for the buyer as operator. That's 720,000 ÷ 510,100 = 1.41x. It passes 1.25x.
Case 2: The QoE cuts earnings
The QoE disallows $100,000 of add-backs, the kind of finding that appears when a "one-time" expense turns out to recur. Cash available falls to $620,000, and coverage drops to 1.22x. It fails.
The SOP is explicit: when QoE findings don't support the proposed debt, the loan amount must be reduced. At 1.25x, $620,000 supports about $496,000 of annual debt service, which is roughly a $3.06M loan. The buyer now needs about $87,000 more equity, a lower price, or both.
That's why you run financial due diligence before the lender's QoE does it for you. A price agreed on seller-adjusted earnings is a price you'll probably renegotiate.
The equity check is only half your exposure. You'll personally guarantee the loan, so the business you already own has to hold up too. The Profit & Tax Leak Check looks for the margin, payroll, and tax leaks in your current company that would thin the cushion behind that guaranty before you sign it.
Seller notes: full standby or full payment
Under the current SOP, a seller note sits in one of two places:
- Full standby. No payments of principal or interest for the term of the 7(a) loan, which can be the full 10 years. Interest can accrue. The note is subordinated, and the seller can't act against the business or collateral without the lender's consent. Only then can it count toward equity, and only up to half the required injection.
- Not on standby. It's ordinary debt. Its payments go into the coverage test, and the SBA loan plus the seller note can't exceed the appraised business value.
There's an exit ramp. Seller debt from the change of ownership can be refinanced once it has been in place and current for 36 months, subject to the SOP's refinancing conditions.
Sellers sometimes balk at a decade of no payments. The negotiation trade is usually a higher accrued interest rate on the standby note, or a smaller note with more buyer cash. The seller's side of that negotiation is a separate decision, and it's worth reading before you propose terms.
Where SBA acquisition loans fall apart
- Valuation below price. The SOP says the valuation must support the purchase price regardless of how the debt is structured. If you pay more than the appraised value, the difference has to be equity.
- Owner-dependent revenue. The QoE must assess customer concentration and whether revenue and margins will hold after the sale. A seller who personally holds the top client relationships is a diligence finding, not a footnote.
- Working capital left out. Buyers squeeze the project budget by dropping working capital, then run out of cash in month three. Size it from a 13-week cash forecast of the target, not a round number.
- Messy buyer financials. If you're buying through an existing company, the lender reviews your company's statements too. The lender-ready financials checklist covers what banks expect.
- Coverage at the minimum. Passing at 1.26x on historical numbers gives you no buffer. Stress the downside the way our acquisition debt-capacity model does: lose the top client, add a hire, and see if you're still above 1.0x.
If you're buying out a partner instead
Buying out a co-owner is a different SBA category, the Owner Buyout, with different rules. The 10% equity can be reduced or waived, there's no QoE requirement, and the buyer must have been in the business for 24 months. Those mechanics are covered in how to buy out a business partner.
Your next calculation
Build the sources-and-uses table with your target's real price, and size working capital from a cash forecast. Then compute the coverage ratio twice: once on the seller's adjusted earnings and once with every add-back you can't verify removed. If the second version is under 1.25x, you know the size of your equity gap before the lender tells you.
Fractional CFO support can build that model and the lender package with you. If the acquisition will lean on your existing company's cash or your personal guarantee, book a Leak Check on that company first, so you know how much cash it really frees up before you commit to an equity number.
Frequently asked questions
Can I buy a business with no money down using an SBA loan?
Not for an initial acquisition. SOP 50 10 8.1 requires at least 10% equity of total project cost, and it cannot be reduced or eliminated. A full-standby seller note can cover up to half of that requirement.
Which version of the SBA SOP applies to acquisition loans now?
SOP 50 10 8.1, published September 25, 2026 and effective October 1, 2026, which replaced version 8. Its Appendix 15 governs all 7(a) changes of ownership.
Can the seller stay on and work for me after an SBA-financed purchase?
Not as an owner, officer, or employee in an initial acquisition. The business can contract with the seller as a consultant for up to 24 months in aggregate, including extensions.
Can I use an earnout with an SBA acquisition loan?
No. Seller earnouts are prohibited in 7(a) changes of ownership. Buyer rebates based on business performance are allowed, and any rebate received must be applied to the 7(a) loan principal.
Does the SBA loan include working capital for the business I buy?
It can. Total project cost may include working capital and borrower out-of-pocket costs such as the valuation and QoE, and the 10% equity requirement is calculated on that total.
Who pays for the business valuation and QoE in an SBA deal?
The lender orders them, but out-of-pocket diligence costs can be passed to the borrower, and money the buyer spends on those reports can count toward the equity injection.
What is the longest repayment term on an SBA acquisition loan?
Up to 10 years of amortization for the business portion. If commercial real estate is included, the real-estate portion can be blended up to 25 years, and SBA loans may not have a balloon.
Can I refinance the seller note later?
Seller debt from the change of ownership becomes eligible for refinancing after it has been in place and current for 36 months, subject to SBA's refinancing conditions.