SDE vs EBITDA: Which Earnings Number Will a Buyer Use for Your Business?

On this page
Seller's discretionary earnings (SDE) is EBITDA plus one owner's entire compensation and perks. It's what a single owner-operator could take out of the business before debt. Adjusted EBITDA is earnings after paying someone a market salary to do the owner's job. The gap between them is the market cost of replacing you.
So which one will a buyer use? An individual who'll run the business personally prices on SDE. A private equity firm, a strategic acquirer, or anyone who installs a manager prices on adjusted EBITDA. Quote the wrong one and the buyer either walks or re-prices once they figure it out.
The two formulas
EBITDA = net income + interest + income taxes + depreciation + amortization
Adjusted EBITDA = EBITDA + verified one-time and personal costs
+ (owner's actual total comp − market cost to replace the owner)
SDE = EBITDA + verified one-time and personal costs
+ one owner's total comp (salary, payroll taxes, benefits)
SDE − adjusted EBITDA = the market cost of replacing the owner's role.
For an S corporation, the owner's salary is usually reported on Form 1120-S, line 7, "Compensation of officers," separate from line 8 salaries and wages. That line is where the SDE add-back starts. Then add the owner's share of payroll taxes, health insurance, and retirement contributions, which are booked elsewhere.
Who uses which number
| Buyer | Earnings measure they price on | Why |
|---|---|---|
| Individual owner-operator, often SBA-financed | SDE | They'll do the owner's job and take the owner's pay |
| Competitor folding you into its team | Adjusted EBITDA, plus its own synergies | Its existing managers absorb your role |
| Private equity platform or add-on | Adjusted EBITDA | It needs a paid management team and lender-grade earnings |
| Lender underwriting an acquisition | QoE-adjusted earnings after a market salary | Debt has to be serviced after someone is paid to run it |
The lender row matters even when the buyer talks SDE. Under SBA SOP 50 10 8.1, an initial acquisition priced at $3 million or more requires a quality of earnings report, that report must document adjustments for above- or below-market owner compensation, and the lender must use the QoE earnings in its debt-service coverage test. Below $3 million there's no QoE requirement, but the lender still verifies the seller's figures against IRS transcripts and still tests coverage. A buyer quoting you a multiple of SDE still has to pass a bank that thinks in EBITDA. The full SBA mechanics are in SBA loans to buy a business.
A worked conversion
Here's a hypothetical $3.5M-revenue marketing agency, an S corporation with one owner.
| Line | Amount |
|---|---|
| Net income | $380,000 |
| + Interest | $15,000 |
| + Depreciation and amortization | $30,000 |
| EBITDA | $425,000 |
| + Owner perks run through the business (car, phone, family travel) | $25,000 |
| + One-time legal settlement | $20,000 |
| + Owner salary (1120-S line 7) | $220,000 |
| + Owner payroll taxes and benefits | $40,000 |
| SDE | $730,000 |
| − Market cost of a replacement agency GM, fully loaded | $195,000 |
| Adjusted EBITDA | $535,000 |
Now look at what happens to price with illustrative multiples:
- An owner-operator at 3.0x SDE: $2.19M
- A financial buyer at 4.5x adjusted EBITDA: $2.41M
- The seller's mistake, 4.5x applied to SDE: $3.29M
That third number isn't a valuation. It's what happens when a seller reads that agencies sell for a certain EBITDA multiple and applies it to SDE. The extra $880,000 is the $195,000 cost of the owner's job, capitalized at 4.5x as if it were profit. A financial buyer spots it in the first call. An individual buyer finds it at the bank.
The multiples here are illustrative. They aren't market quotes. The point is the mechanics: a higher multiple on a smaller number can beat a lower multiple on a bigger one, so compare offers in dollars, never in multiples.
Every add-back in that table has to survive a buyer's questions, and so does the replacement salary. If you can't tell which of your "personal" costs would hold up, start with the Profit & Tax Leak Check: it's free, and it flags the margin and tax items a buyer's accountant is most likely to challenge.
Three traps in the conversion
Trap 1: Adding back two owners
SDE adds back one owner. If two partners both work full-time, only one salary goes back in. The other's job still has to be paid for at market. Sellers who add back both partners overstate SDE by a full salary.
Trap 2: Using today's pay as the market rate
If you pay yourself $90,000 to keep taxes low but the job costs $195,000 to fill, adjusted EBITDA has to come down, not up. Below-market owner pay inflates EBITDA. The same SOP language that catches above-market comp catches this too.
Trap 3: Pricing one job when the owner does three
Many service-business owners are CEO, head of sales, and lead on the biggest accounts. A single GM salary doesn't replace all of that. If the buyer needs a GM plus a senior account lead, the market replacement cost is both salaries, and adjusted EBITDA falls again. The buyer-side version of this test appears in financial due diligence when buying a business.
What hiring a GM before the sale does to each number
Owners often hesitate to hire a general manager before selling because "it'll cut my earnings." Which earnings it cuts depends on the metric.
Take the agency above and add a $195,000 fully loaded GM a year before the sale, while the owner steps back to a $60,000 advisory role.
| Measure | Before the hire | After the hire | Change |
|---|---|---|---|
| Reported EBITDA | $425,000 | $425,000 + $200,000 lower owner comp − $195,000 GM = $430,000 | +$5,000 |
| SDE | $730,000 | $430,000 + $45,000 add-backs + $60,000 owner comp = $535,000 | −$195,000 |
| Adjusted EBITDA | $535,000 | $535,000 (no further replacement needed) | flat |
Owner comp drops from $260,000 to $60,000, so reported EBITDA barely moves. SDE falls by the full GM cost, because a real salary replaces what used to be an add-back. Adjusted EBITDA doesn't change. It already assumed you'd pay someone to do the job.
So the hire costs an SDE buyer's valuation real money, and costs an EBITDA buyer's valuation almost nothing. What it buys you is proof. A manager with a year of results turns "assumed replacement cost" into a fact, and that's what lets financial buyers into the process. If your target buyer is an owner-operator, don't make the hire for the sale. If it's a PE firm or a strategic buyer, the hire is often the best money you'll spend.
Bennett's rule for which number to lead with
Don't pick the metric that produces the bigger number. Pick the one that matches the buyer you can realistically attract, then improve it.
The decision rule comes down to one question: could you step away for 90 days without revenue or margins slipping?
- No. Your buyer is buying a job. Lead with SDE, price against owner-operator buyers, and expect SBA financing to set the ceiling.
- Yes, with a documented management layer. Present adjusted EBITDA. Now financial and strategic buyers are in the pool, and they pay on a different basis.
Moving from the first answer to the second is often worth more than another year of revenue growth. This is the owner-dependence lever in practice. The key-man discount is what buyers charge when you can't pass the test.
What to have ready before any buyer conversation
- A one-page bridge from tax-return net income to EBITDA, SDE, and adjusted EBITDA, with every add-back tied to a ledger entry. The EBITDA recast walkthrough shows how to build it.
- A written description of the owner's role, with the market salary for each job you do, and the source of that salary estimate.
- Three years of the bridge, not just the best year. Buyers weight trends, and lenders under SOP 50 10 8.1 test coverage on the last fiscal year or a two-year average.
The decision
Run the conversion table on your own last full year. If the gap between your SDE and adjusted EBITDA is bigger than one market salary, you're doing more than one job, and every buyer except an owner-operator will discount for it.
From there, decide whether to sell as is, to an SDE buyer, or spend 12–24 months building the management layer that earns an EBITDA buyer. Fractional CFO support can build the three-year bridge and stress-test the replacement salaries. If you want a fast outside read before committing to either path, a Leak Check shows which margin and tax leaks are shrinking both numbers today.
Frequently asked questions
Is SDE always higher than EBITDA?
SDE is higher than adjusted EBITDA whenever the owner's role would cost money to replace, which is almost always. If the owner is paid well below market, the gap is larger still, because adjusted EBITDA must deduct the full market salary.
Can a business with two working owners use SDE?
Yes, but only one owner's compensation is added back. The second owner's job must be replaced at a market salary in the calculation, or SDE is overstated by a full salary.
Do lenders use SDE or EBITDA to approve acquisition loans?
Lenders test whether cash flow covers debt service after someone is paid to run the business. Under SBA SOP 50 10 8.1, an initial acquisition priced at $3 million or more needs a QoE that documents owner-compensation adjustments, and the lender uses QoE earnings for the DSC test. Smaller deals still get a DSC test on transcript-verified figures.
Where do I find the owner's salary for an SDE calculation?
For an S corporation, officer pay is on Form 1120-S line 7. Add the owner's payroll taxes, health insurance, and retirement contributions, which appear in other expense lines, plus any verified personal expenses.
How do I estimate the market salary to replace myself?
List each role you perform, then price each from current job postings or a compensation survey for your region and industry, fully loaded with payroll taxes and benefits. Document the source so a buyer can check it.
What earnings level makes buyers switch from SDE to EBITDA?
There is no fixed dollar line. The switch follows the buyer type: once a business has a management layer that runs it without the owner, financial and strategic buyers enter and price on adjusted EBITDA.
Should depreciation be added back in SDE for a service business?
It is added back in both SDE and EBITDA, but a buyer will still ask what equipment, software, or vehicle replacement the business needs each year. Expect that maintenance spend to come off value in some form.
Can I show a buyer both SDE and adjusted EBITDA?
Yes, and a clear bridge showing both builds trust. Present them from one reconciliation so the buyer can see the owner's role cost as the only difference.